Incubator Hatches COVID-19 Solutions

Incubator Hatches COVID-19 Solutions

Bookmark and Share


Teaming up with a local steel manufacturer, TechPort staff construct a box that can hold about 7,000 masks to be heated and sterilized. The team at the UMD-supported business incubator is also producing 3D-printed masks, face shields, and breast pumps-turned-ventilators. (Photo courtesy of Tommy Luginbill/TechPort)
Teaming up with a local steel manufacturer, TechPort staff construct a box that can hold about 7,000 masks to be heated and sterilized. The team at the UMD-supported business incubator is also producing 3D-printed masks, face shields, and breast pumps-turned-ventilators. (Photo courtesy of Tommy Luginbill/TechPort)

It started with a simple goal: Create a 3D-printed mask that could be used when personal protective equipment (PPE) is in short supply, just to see if it could be done.

Soon, the staff at TechPort, a University of Maryland-supported business incubator in St. Mary’s County, was handling a much larger operation, with dozens of local engineers joining in after word spread to produce face shields, breast pumps-turned-ventilators, and a device to sterilize PPE using heat.

“It went from just being an experiment to, ‘We actually think we need to make sure people in our medical community in Southern Maryland have access to’” much-needed equipment, said Tommy Luginbill, TechPort director. He estimates that some 70 face masks and 200 face shields have been manufactured and donated to medical personnel and first responders.

No matter how many masks and shields they produce during the coronavirus pandemic, Luginbill said, eventually the supply will run out. So his team turned to the idea of sterilizing equipment with heat based on research that shows that many viruses die at 157 degrees Fahrenheit after 30 to 60 minutes.

Teaming up with a local steel manufacturer, the team designed a box about half the size of a shipping container that can hold about 7,000 masks. The device was tested Friday at the University of Maryland Charles Regional Medical Center, and the group is working toward FDA approval.

Luginbill’s team has made the designs for the masks and shields open-source, and local manufacturers, as well as individuals and manufacturers abroad, have printed equipment based on them. “We don’t want to hold on to any of this information because it’s a public good,” he said.

TechPort engineers and colleagues Brandi Gerstner, Rachel LaBatt, and Alex Scott—a 2018 graduate of UMD’s A. James Clark School of Engineering—also pitched in with an idea that struck Gerstner, a mom: Why not see if it was possible to create an emergency ventilator by altering the suction power in a breast pump to expel air? Using an X-Acto knife to cut the tubes, she made it happen.

“We simply switch the inlet and outlet tubes on the pump inside of the device so that it blows instead of sucks,” said Scott.

With 11 breast pumps modified so far—and 100 more machines donated over the weekend—Gerstner, LaBatt, and Scott are hoping to perfect the design and get the FDA approval required before the device can be used to help critically ill patients breathe.

“The thought of being able to help even just a single person is motivation in and of itself for us to continue this ventilator design,” said LaBatt.

This story originally appeared on Maryland Today.

Related Articles:
In Race With Virus, Researchers Speed Development of Medical Equipment
Shelter-in-place Compliance Remains Low, UMD Research Finds
Public health planners: Free resources for emergency health clinics
Clark School Engineers Create Solutions for a Crisis
UMD developing COVID-19 decision making tools for higher education officials
UMD, UMMS Researchers to Develop More Precise COVID-19 Models
Pines, UMD Engineers Help Prince George’s County Reopening Efforts
Wastewater Testing Could Help Track COVID-19
Social Distancing: Drop Seen for First Time Since Outbreak
COVID-19 Decision Making Gets a Big Data Boost

April 16, 2020


Prev   Next
“The thought of being able to help even just a single person is motivation in and of itself for us to continue this ventilator design.”

Current Headlines

University of Maryland Announces Launch of Research Leaders Fellows Program

Brian O’Neill Named New Director for the Joint Global Change Research Institute

Harnessing Brain Imaging to Understand Child Development

Pines to Teach ‘Grand Challenges’ Course

Air Pollution Contributes More to Environmental Injustices Than Previous Thought

Srinivasan Receives Funding from Google to Advance Contact Tracing Methods

Out of the Shadows

How CHIDS, Welldocs Are Using AI to Improve Health Outcomes

News Resources

Return to Newsroom

Search News

Archived News

Events Resources

Events Calendar

Additional Resources

UM Newsdesk

Faculty Experts

Connect

social iconsFacebookTwitterLinkedInResearch News RSS Feed
Office of Technology Commercialization
2130 Mitchell Building
7999 Regents Dr.
University of Maryland
College Park, MD 20742

Phone: 301-405-3947  |  Fax: 301-314-9502
Email: umdtechtransfer@umd.edu

© Copyright 2013 University of Maryland

Did You Know

UMD's Neutral Buoyancy Research Facility, which simulates weightlessness, is one of only two such facilities in the U.S.